 |
||||||||
Card Making Project - Coral and Cream Anniversary Card
Made by Madeleine
This project can be made using any large card topper suitable for mounting on a 144 x 144 or 148 x 148mm card and can be adapted to suit the occasion.
|
||||||||
 |
To make this card you will need:
 Stardream Coral Card cut and creased to 144mm x 144mmPiece of Stardream Coral Card cut to 96mm x 96mmCream Patterned Backing PaperLarge Square Card ToppersSilver Foiled Wedding and Anniversary SentimentsDouble Sided Tape - 5mmPhoto GlueCoordinating Organdie Ribbon 7mm wideWave Decorative Scissors or Wave Blade and Carl DC-212Scissors or a Craft Knife and Cutting MatCorner Rounder Punch |
|||||||
Trim 15mm from the front right hand edge of the Stardream Coral creased card using the wave blade or decorative scissors.
Cut the cream patterned backing paper to 144mm x 164mm. The extra 20mm is to allow lining up of the pattern with the coral creased card. Trim 15mm from the edge using the wave blade or decorative scissors to create a piece measuring 125mm x 164mm. Line this up with the wave edge on the coral card and glue down using double sided tape. Trim the excess cream backing paper from the top and bottom of the card using scissors or a craft knife and cutting mat.
Using double sided tape attach the 7mm organdie ribbon to the left hand side of the card. Take the ribbon all the way around the card and tie at the front.
Using the corner rounder punch round all 4 corners on the Stardream Coral 96mm x 96mm piece of card.
Push out the card topper and attach to the piece of coral card using photo glue.
Position and attach the coral card and topper to the card using photo glue.
Cut out the sentiment from the sentiments sheet and fix in position at the bottom of the card using photo glue.
********************************
Please feel free to copy this card for your own use. Our angel policy can be accessed via the Gallery home page.
____________________________________________________________________________
|
||||||||
 |
||||||||
